AP Racing Radi-CAL "Competition" Big Brake Kit - Tesla Model 3

Redwood Motorsports

$4,399.00

Complete front AP Racing Radi-CAL "Competition" Big Brake Kit for the Tesla Model 3

  • Features AP Racing CP9660 Radi-CAL calipers
  • 372x34mm, 84 vane AP Racing disc
  • Saves roughly 6 unsprung lbs. from nose vs. OEM brakes despite considerable size increase
  • Every component designed to resist the heat of extended track sessions
  • Pistons sized properly to allow for seamless integration with OEM master cylinder and ABS system
  • Designed to work with OEM rear brakes or our Essex/AP Racing rear BBK

Advantages Over OEM Brake System

Our CP9660/372mm Radi-CAL Competition Brake Kit offers our customers the following advantages over the OEM brake system:

  • Approximately 6 lbs. of unsprung weight reduction despite a considerable size increase over stock
  • AP Racing Radi-CAL calipers are the stiffest, lightest, and most technologically advanced calipers available at any price
  • CP9660 calipers use a 18mm thick, commonly available brake pad shape
  • Ventilated, domed back, stainless steel pistons keep heat out of the brake fluid and provide an ultra-firm pedal
  • Mitigation of pad knockback via anti-knockback springs behind the caliper pistons
  • Anodized caliper finish that is resistant to wear and deterioration at elevated temperatures
  • Stainless steel caliper hardware for a long caliper service life under frequent pad change conditions
  • High temperature, low drag seals that will hold up to track temps= less rebuilding and longer service life
  • No dust boots to burn up
  • Simple pad change with two bolts or quick-change spring clip, no caliper removal required
  • Lifetime professional caliper rebuilding support by Redwood Motorsports (at a fee)- pull off your calipers, send them to us, we clean, inspect, and rebuild them
  • Available disc burnishing service ensures that your kit arrives ready to be installed and driven hard immediately
  • Championship winning, 84 vane, fully floating, AP Racing J Hook racing discs with 12 attachment points to hat
  • Anti-knockback/anti-rattle disc attachment hardware
  • Replacement iron disc rings available at an extremely competitive replacement price
  • Disc metallurgy specifically designed to handle the temps typically seen on track offer a long service life
  • Highest quality, stainless steel brake line with clear sheath that reduces compliance over OEM rubber design

Model Year



Tesla Model 3


 


AP BBK

Performance

Caliper


CP9660-2S4L/3S4L

OEM four piston

Weight no Pads


6.2 lbs.

9.6 lbs.



27.0mm x 2


Piston Sizes


31.8mm x 2

42mm x 4



38.1mm x 2


Piston Area


50.1cm^2


Inlet Thread


M10x1.0


Mounting Type


Radial

Lug

Mtg. Centers


180mm

128mm

Mtg. Offset


42mm


Pad thickness


18mm

16mm

Disc


CP6084-102/103GA


Type


2-piece floating


Weight


19.1lbs.

19.2 lbs.

Diameter


372mm

355mm

Thickness


34mm

25mm

Radial Depth


54mm

62mm

No. of Vanes


84

Pillar vane